I-Beams (IPE)
I-section steel beams used for structures carrying heavy and medium loads, noted for their high rigidity.
Product families
Our Products
29 results
PF-019 products
Structural Sections
I-Beams, H-Beams, purlins, tubes, angles, pipes, and flat bars for metal structures.
JIS H-Beams
Black-steel H-beams used as main supports in buildings, hangars and bridges, for their high capacity under vertical and horizontal loads.
Purlins
Purlins and structural wall girts in C, Z and U sections of G90 (Z275) galvanized steel: an integrated system allowing flexible design options.
- Material
- G90 (Z275)
PF-022 products
Zinc Sheets
Zinc sheets and metal roof tiles produced to order.
Decorative zinc sheetsAB4 Decorative Zinc Sheets
AB4 zinc is a galvanized steel sheet with a colour-fast coating, a decorative design and a smooth surface.
- Thickness
- 0.22 – 0.70 mm
Decorative zinc sheetsBrick-Pattern Zinc Sheets
Brick-pattern zinc is a decorated roofing and cladding sheet with a brick-like look, giving buildings an attractive appearance with high strength and durability.
PF-031 product
Casting Sheets
Galvanized sheets for concrete-support applications.
Casting Sheets
Galvanized casting sheets, 995-1000 mm wide and 0.50-1.20 mm thick.
- Width
- 995 mm - 1000 mm
- Thickness
- 0.50 mm - 1.20 mm
PF-047 products
Steel Sheets
Hot rolled, electro, galvanized, cold-rolled, and chequered sheets, plus ZAM and Galvalume sheets and coils.
Hot Rolled Steel Sheet
Hot rolled steel sheet used in blacksmithing work, steel structures, and storage tanks.
- Thickness
- 1.00 – 20.00 mm
- Width
- 1000 – 2000 mm
Electro Steel Sheet
Used in bread ovens, pastry ovens, water coolers, electrical panels, and related products.
- Thickness
- 0.40 – 0.60 mm
Galvanized Steel Sheet
Used in ice molds, evaporative coolers, metal panels, water tanks, and more.
- Thickness
- 0.30 – 5.00 mm
- Width
- 1000 – 2000 mm
Cold-Rolled Steel Sheet
Used in appliances, small devices, vehicles, electric motors, and metal furniture.
- Thickness
- 0.32 – 1.00 mm
- Width
- 1000 – 1220 mm
PF-057 products
Solar Energy Accessories
Mounting accessories for rooftops, ground systems, car parks, and tin roofs.
Roof Top
Mounting accessories for solar energy systems on rooftops, ground sites, car parks, and tin roofs.
Ground Mounted
Ground mounting is one of the most common solar-panel mounting systems: the panels are fixed on metal support structures anchored in the ground, giving greater stability and efficiency.
Car Park
Mounting accessories for solar energy systems on rooftops, ground sites, car parks, and tin roofs.
Tin Roof
A mounting system for installing solar panels on metal roofs such as hangar and warehouse roofs.
PF-0610 products
Poultry Farm Accessories
Steel sheets and accessories for poultry farm buildings.
Feeder troughsLayer Feeder Troughs
High-durability feeders made from rust-resistant galvanized steel sheet, for layer houses and even feed distribution.
- Thickness
- 0.6 / 1.1 / 1.5 mm
- Feeder troughs
Breeder Feeder Troughs
Used as a poultry feeding trough on farms, especially breeder farms, where more durable and hygienic equipment is needed.
- Thickness
- 1.5 – 2 mm
Feeder troughsHeavy-Duty Feeder Troughs
Special metal feeders that hold large quantities of feed, intended for heavy-duty use on farms.
Feeding-line partsTrough Lifting Stand
A galvanized steel stand for raising and securing the trough run and adjusting its height inside the farm.
- Thickness
- 1 / 1.2 / 1.5 / 2 mm
PF-0721 products
Warehouse Accessories
Accessories for warehouses and metal buildings.
Roof and wall accessoriesRainwater Gutters
Water gutters designed to collect and drain rainwater efficiently, protecting buildings, hangars and roofs from water leaks and corrosion.
Roof and wall accessoriesRoof Flashings and Trims
Precisely made steel flashings that cover the edges and corners of metal roofs, in a range of profiles to meet specific requirements.
Roof and wall accessoriesCurved Ridge Cap
A metal curved ridge cap that covers the ridges and curves of metal roofs, giving a tight seal that keeps water out.
- Material
- PPGL
- Ventilation
Rooftop Turbine Ventilators
Turbine ventilators extract heat, water vapour and dust and improve indoor air quality.
- Size
- 20 in
PF-084 products
Cable Tray and Accessories
Cable trays and cable channels in galvanized sheet steel, to protect and organise electrical cabling in electrical and industrial projects.
Cable traysLadder Cable Tray
A durable cable-management system for electrical and industrial projects, with an open design that carries a large volume of cables.
Cable traysClosed Cable Tray
A system for managing and protecting wires and cables inside facilities, fully covered to shield them from dust, moisture and impact.
Cable traysPerforated Cable Tray
A core element of wiring and cable-management systems, made from high-quality galvanized steel sheet and suited to industrial and commercial environments.
Channels and accessoriesPerforated C Cable Channel
A galvanized sheet-steel cable channel with a C profile and rectangular slots along its length.
PF-091 product
Road Barriers (W-Beam)
Galvanized W-beam sections for road guardrails, supporting traffic safety and protecting highways.
- Guardrail sections
W-Beam Guardrail
A W-beam section used in road guardrails, with the strength and durability to protect highways.
PF-101 product
Galvanized Roofing Sheets
Galvanized roofing sheets with 1000 mm width and order-based length.
Galvanized Roofing Sheets
Galvanized roofing sheets with 1000 mm width and order-based length.
- Width
- 1000 mm
- Thickness
- 0.22 mm - 0.70 mm